This article explains the Standard Procedure for Rescue of a Surface-Supported Diver. It also covers identifying a lost diver and performing CPR. It is best to get a full certification before trying a diver rescue. It will help you save the lives and property of other divers during an emergency. It discusses how to locate the victim, perform CPR on unconscious divers, and other important topics.
Standard procedure for rescuing a surface supplied diver
Rescuers need to act quickly if a surface-sealed diver is in danger and take him or her to safety. This is typically a dive bell or an area where the diver cannot drown and first aid can be provided. It is possible to reach a diver using the bell at times, but rescue divers need to adjust their response to accommodate the situation.
Securing the umbilicals is the first step to rescue. The bell should be removed by the diver. This is the area where the umbilical enters. The surface tender should then follow the diver's umbilical out of the bell. Depending on the bell, divers may also be supplied using the individual umbilicals. To avoid snagging, the umbilicals of the diver will need to be secured.
The diving supervisor and the diver's tender should provide instructions to rescuers. A standby diver might perform other tasks while a diver's life is saved. However, they must be able provide emergency help to the diver if necessary. It is essential to maintain audio and physical contact with the diver throughout this procedure.
Identifying a lost diver
Identifying a lost diver can be a challenging task, but fortunately, there are many ways to find someone missing in the water. Contact the authorities first. In this instance, the diver was reported missing June 17th in Mukilteo Washington. Police and fire departments responded to this call. Coast Guard divers and sheriff's officers searched the area. They could not find Korompis or his companion.
A MOB device is another option to help locate a lost diver. This device uses an underwater radio signals to transmit a distress signal. However, it only works if nearby vessels are able to receive the signal. It is highly recommended to use the device. However, it is not always practical. Some boats lack AIS technology which makes it difficult for them to find a lost diver. SAR services can assist a diver if they have an AIS device.
CPR on an inresponsive diver
If a diver is not breathing, you may attempt to revive him or her by performing CPR. You can either slide your hand under the diver's arm, or reach up and hold the diver's breathing apparatus. You can then pinch the diver's nose, and then roll them towards you. Give two rescue breaths if breathing stops. Repeat the process two to three more times.
It is important to avoid trying to retrieve the bell of a diver during CPR. It could lead to blood pooling. Keep breathing rescue until the diver is conscious again. The diver may need to be transferred to a decompression chamber. Performing CPR on an unresponsive diver may be a complicated task, but it is necessary.
You can use buoyancy to bring the diver back to the surface if your pulse is visible. This will let you assess the condition of your diver and determine whether he requires rescue breathing. If the diver is not breathing you can alternate between two rescue breaths and 30 chest compressions. Alternate your breathing pattern for no more than 30 seconds.