The term wreck diver is usually associated with recreational diving, exploring shipwrecks. While wreck diving is the traditional site, many people are now using retired ships to create artificial reefs. For more information on wreck diving, please read the following. These are some important tips to get you started in wreck diving. First, get your equipment ready! There are many different types of equipment. The right equipment can make the difference between a safe and dangerous dive.
Non-penetration wreck diving
If you are new to scuba diving and would like to try non-penetration wreck diving, then there are a few things you need to know. First, wrecks are often a place to fish, so divers should be aware of any lines or fishing nets. You should also be aware that the terrain underneath can have sharp edges. The currents can carry divers away from what they are looking for. While it's not advisable to dive in this type of terrain, non-penetration wreck diving is a good option.
Although it might sound easier, technical penetration diving has its own set of hazards. Light zone diving poses dangers due to overhead hazards, proximity of the wreck structure, and possible trapping in narrow passageways. Furthermore, the presence of silt and mud in some wrecks can severely compromise visibility and make orientation very difficult. Non-penetration wreck diving allows the diver to stay within the zone of light and move to an exit point.
A view of a sunken ruin
Not only are traditional surveys required, but also the use of specific equipment and an in-depth knowledge of the maritime history surrounding the wreck must be done. Depending on the time and accuracy required, the survey method may be a combination of a GPS position fix, a tape baseline, or offset and ties measurements. Several techniques are available for surveying a sunken wreck, including sonar and other non-destructive methods.
The objective of a shipwreck survey is to identify the vessel and its location. It should identify historical events, navigational hazards, and environmental conditions. A summary of the vessel's structure, the incident that caused it to sink, and any previous archeological surveys should be included in the survey report. To make precise measurements, it should be possible plot the site on a chart.
Equipment required
Knowing the basics of a shipwreck is essential before you dive into it. Be familiar with its layout, key features, and hazards. This will allow you to prepare for your dive and decrease the risk of getting into an accident. Below you'll find the information you need to dive in a shipwreck. Before you dive, be sure to go through the checklist.
Proper buoyancy control is crucial to not lose your way in the darkness. Proper buoyancy control is crucial for wreck diving. You shouldn't dive in deep waters without a weight belt or a buoyancy controller tank. You will have a lot of fun diving if you have a weight belt. These two pieces will help ensure your safety as well as the safety of others at the wreck.